Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
We are no longer supporting TapaTalk as a mobile app for our sites. The TapaTalk App has many issues with speed on our server as well as security holes that leave us vulnerable to attacks and spammers.
Thanks for the reply 20/80. Where did you get your wheels? I was looking around online for awhile last night. Do any 135mm wheels work? Like ones made for a skidoo of Polaras? Thanks again!
When you replace these idlers on a Nytro do you replace all 4 outside and 2 on the inside of the skid? Obviously leave the rear guide wheels at the very end of the skid alone?
Thanks for this explanation! I am going through and refreshing my clutches now on my stock 5,000 mile Nytro XTX. Putting a little bit bigger lug track on as well (1.35") I am also changing to 14.5 rollers and Y-P-Y primary spring. Is there a different secondary spring you'd suggest? Or a certain...
Thanks for the quick reply MrSled. It may have been closer to 1/16th actually. But I was not scientific in how I ground it. Just went hog-wild on the grinding wheel. I thought it would be fine if there was extra removed. I never thought those flanges could crack from being over tightened and I...
MrSled, What are your thoughts on grinding material off of the exhaust clamp stopper/spacer and cranking clamp bolts down tighter? Have you seen cracked flanges as a result? I ground a good 1/8th inch off the stopper/spacer barrel and really cranked the bolts down tight. Now I have been talking...
You seam like you have experience on these sleds so I have a question for you. I just did the copper donut repair on my ‘11 Nytro. Per this group I ground material off the clamp stoppers so I could crank the bolts down tighter. Then I cranked the bolts down real good and tight. More than 13ft...
That’s what I’m wondering? I’m really not so sure I want to remove those or heat exchanger protectors. I live in Midwest and we don’t get big powder. Lots of snow this year though. Maybe 1.6” is too much track?
Hi, digging up an old thread here but I’m looking for some help. I bought a 2011 Nytro XTX this year that I have really been enjoying. It needed a new track when I bought it but I negotiated that expense off the purchase price and have been making due with the stock track that has many...
I just did this job on my 2011 Nytro with 5500 miles. All donuts were completely MIA. I figured I’d post my personal tips and tricks after not seeing them mentioned in this thread. 1.) Grind the very tip off of your allen socket flat using a bench grinder. If you look at the tip of the bit, it...
Hi all, As title states, I am really trying to figure out what brackets these are? I bought the sled this year and windshield was ripped off. Would like a shield to put on it and thinking I can possibly contact the company who has whatever shield these brackets go to. It does not appear to be...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.