Search results

my 2016 mxzx 1200 129in is listed at 515lbs

Thanks I'll check it out

Thanks Stubby for the quick reply, thats what I thought, but would rather be certain.

I have a 2006 apex and my RA cable broke and came out while riding, boot is still attached to shock. my question is while riding will the shock leak from the adjuster on the shock? The shock is set to where i ride it 90% of the time, can i still ride it without worring about shock leaking anything?

thx thor will give it a try

CaptCaper I have refilled threw the radiator cap several times, r u suggesting I fill threw the other tank, when cold both tanks r empty, when i fill radiator cap tank it stays filled and bubbles come up from bottom (some have suggested bad head gasket are causing bubbles) then when it cools...

ok i refilled, anyone know how much antifreeze the system takes, and could i be losing any threw the head gasket if it was compromised when i overheated?

Yes vx700xtc it did over heat and shut off once, i tried to restart it would not so i towed it home and waited til morning, plugged hole filled system and started right up and idled fine. I replaced exchanger and rode it a couple times having to add a little antifreeze each time

hey guys i have a 2006 apex rtx and i just changed out my front heat exchanger for the second time in two years due to a stud puncture,(what a pain again)i filled up with 50/50 and ran the sled to make sure it was full, my question is that the over flow res is full but not returning back to main...

anyone know the part number for track clips for a 2006 apex rtx ?

Did you add those decals to the tunnel or did it come that way, either way it looks great? :Rockon:

thanks addict ;)!

Just wondering if the track pitch is 2.52 or 2.86 on my 06 apex, and if they are interchangeable, looking at ice attack tracks and they have both available?

Thanks guys for the responses, good thing its the end of the year for my riding, will take my time and get it right ;)!

Thanks guys for the responses, good thing its the end of the year for my riding, will take my time and get it right ;)!

Well i hit something on the trail and bent my front heat exchanger and need to replace , question i have is will i have to take drivers out or can i get at all the rivets from the clutch and chaicase sides, doesnt seem to be any rivets at top of exchanger

Those who have gone to the demo rides, was there a 2014 standard Nytro there to ride ?

Thanks yamaha1973, I have heard of the different sleds feeling different when testing and was wondering if they might have had different clutches as well as mapping

Can anyone who has test ridden the Viper tell if it had Yamaha clutches or AC clutches ? :sled1:

Does anyone know if there is a clicker knob that would mount directly to the shock instead of having to use the RA adjuster assembly, would love to eliminate the cable, boot, and tunnel mount adjuster, sled is a 2006 rtx, thx ahead for any help