• We are no longer supporting TapaTalk as a mobile app for our sites. The TapaTalk App has many issues with speed on our server as well as security holes that leave us vulnerable to attacks and spammers.

Search results

  1. Port-Parts

    RX-1 Broken Carb T's

    The good news is the fuel inlet T part number for a RX-1 is 8FA-14251-00-00 - they were never shown on a microfiche - now the bad news... they are no longer available in the US and we no longer have any - you may want to try some of the bigger Yamaha snowmobile dealers from that era and see if...
  2. Port-Parts

    SLIM JIMS OR SNOW STUDS DOUBLE DOWN ON CURVE SKIS

    The square bar SnowStuds c@a/curve sniper double downs are part number SD8904 (4 inch), SD8906 (6 inch), SD8908 (8 inch)
  3. Port-Parts

    Best long lasting ski rod

    SnowStuds Magnum series bars are the most durable from what I have seen - They use the most carbide wearpads (in comparison on Tuner ski carbide Woody's use none and only places hardweld filler on the front of the bar) and have a large carbide insert that lasts. Made in the USA - a couple...
  4. Port-Parts

    2012 Apex 128 Suspension wheel (upper that bolts into tunnel) part number change.

    The only difference with the part numbers you list is that the 8CR-4731A-00-00 has plastic spacers pressed into the bearing for use in some applications - in your application they are not needed - simply remove them (small screwdriver and tap them right out) and that wheel is then exactly the...
  5. Port-Parts

    lets hear it for the 2020 Viper

    I can confirm the rods are definitely the same from 2016-2019 Vipers (non-early build 2016s) and are the same rods that were in all 2016-2018 Vector, Venture, and VK Pro IIs as well. They definitely are not as strong as the 08-15 rods in the previous engine - the thing is they only really have...
  6. Port-Parts

    lets hear it for the 2020 Viper

    I can guarantee you it's not a Chinese motor...if your basing your guess on the price of the parts have you considered that when the new version of the engine came out it was done so that the engine and its internals could be used across multiple platforms (snowmobile, sxs, waverunner, and...
  7. Port-Parts

    Getting rid of the roll over valve

    I don't have any technical details on this yet or whether there will be a way to retrofit it but here's a pic of the electrically heated rollover valve on a 2020 winder. Also note the fitting on the inlet to the valve appears to have a shoulder now which may prevent the fitting from moving in...
  8. Port-Parts

    Anybody else notice?t

    To clear up some speculation on this and provide some insight - when yamaha announced the inventory reduction plan for the 2019 model year being a large volume yamaha snowmobile dealer we were probably affected more than most yamaha snowmobile dealers and were put into a position where we really...
  9. Port-Parts

    New MTN Ski

    The Sidewinder mtx skis are 6.75" wide
  10. Port-Parts

    Windshield for a sidewinder that has mirrors built onto it.

    Yamaha has what they are calling a Medium (similar in height to stock DX windshield) and Medium Sport windshield that both have the option to have optional mirrors mounted to them - part numbers for windshields, mirrors, and hardware to install them below. Medium Sport Windshield -...
  11. Port-Parts

    part number ?

    That is the new Medium bag and is Yamaha part number SMB-8MB63-00-BK - MSRP is around $135 in the US - we sell em for $115 plus shipping.
  12. Port-Parts

    Klim hand guards

    Those new Klim Deflect Muffs are very nice - I got to try a set out last winter and was very impressed with them. I'm not really into the muff/gauntlet thing and in the past have really struggled at our store when selling them or ordering them for people as I didnt feel any previous versions...
  13. Port-Parts

    Tuner Ski's on 2007 Attack - What am I doing wrong?

    - Unfortunately I'd advise against this swap as well as the mounting location on those old steel skis is about 1.5-2" higher than the Apex style ski - what will happen with the apex skis in place of the old steel ones is that the front of the sled will sit much lower affecting handling and the...
  14. Port-Parts

    need some 2016 acessories

    Maim - Thanks for the order! Hope you enjoy the new Apex! :sled1:
  15. Port-Parts

    Tuner Ski's on 2007 Attack - What am I doing wrong?

    I'd bet those Tuners were off a Viper and not an Apex. The location of the hole for the ski bolt is higher on the Viper Tuner ski than on the Apex style - this makes the ski rubber not fit properly as it will be way to loose. Unfortunately this is a common problem when buying used as most...
  16. Port-Parts

    New SRX's ordered?

    We did have a SRX go to its new home last week and there will be some more over the upcoming weeks as our first batch of sleds all got set-up last week.
  17. Port-Parts

    2019 Sidewinders Arriving

    greatwhite89 is correct that first sled in the second row is a BTX LE 153" murdered137 - If you are looking for a Sidewinder XTX be sure to give us a call at the number in my signature (preferably mid next week as we are currently out of the shop working the snow show in Syracuse, New York...
  18. Port-Parts

    2019 Sidewinders Arriving

    Port Yamaha’s 1st wave of Spring Power Surge units have arrived. We’ll be calling shortly to schedule deliveries. Whole lotta HP in this pic! #viewfromtheoffice #srxlife #portyamaha 1-866-4yamaha #turbo204hp #intothewarehousetheygo #thankyou #fiftyoneyearsstrong
  19. Port-Parts

    y.e.s warranty price

    Guess I didn't clarify the no win thing properly. It's a no win for us as we advertise the great price (and yes we are still making a profit) that you are using as a benchmark but in this case didn't get the sale = no win for us. Hope that makes sense.
  20. Port-Parts

    y.e.s warranty price

    You may wanna rephrase that Win Win for everyone part as its clearly not a win for the dealer willing to offer that great price in the first place...;)!


Back
Top