Search results

Been digging around the site for an hour looking for the contacts to revalve my skid shocks! Anyone have a couple leads on where to send the Bucking Bronco shocks from my 2015 Ltx LE model Viper?

Had the same "slow drip" leak on garage floor coming from the chain case ! Found the seepage coming from the chain case tensioner bolt securing/lock nut. Be sure that this "lock nut " is torqued tight after backing the tensioner bolt off 1 1/2 turns from finger tight! Its been days now...

I have been experiencing the same -no start issue on 2015 LE. It will start fine initially, regardless of ambient temp! It is when I shut it off at a stop for 10-15 minutes and go to re-start. Turns and turns with no ignition. Wait and try again...it eventually goes but embarrasing. Hard to...

What's wrong with the stock 2014 yamaha/cat ski with duece or Bergstrom tripples???

never mind!... dug deeper and found the answer in previos post. XS

Which curve ski are you boys putting on the '14-15 Viper

When you folks are setting the pressure on the front fox floats are they under pressure or raised/unsprung??

Don't get the warm up event either! Lots of bubbles etc. form -elevating the level. I'm gonna stick with 1/2 a glass when cold!

Looking into it myself , as removal of muffler seems a frequent thing! Muffinworks advises copper permatex sealer to avoid leakage.

Sheet of paper 8x10, was inserted in dealer set-up instruction manual indicating all the specs/fill capacities and it stated 12 oz., however I'll bet its less. Just fill to 1/2 sight window! Beats a dip stick! Also If ya measure the drained oil it will be exact.

Nor recommended viscosity!!??

Not the listed 4.1 us gt. specified....I just changed mine and its best to fill with 3 qt., run for 10-15 sec. and check sight window! should come out to 3.5qt.!

Love my '05 Rage! Have spent weekend on '06 Apex ER-still love the feel on the Rage! " Very confident feel " is how I describe it.