Search results

ive pulled 116.8 mph on gps on my 07 rtx with excell, ram air lid and fuel and ignition controler. i'd expect more and be mad if thats all i got for top end with the yamacharger

might try it this weekend and if it doesnt work just thread the cut piece back on

Anyone ever cut any material off the transfer rod nuts on an 07 rtx with the pro active skid? i know guys including me used to do it on the old pro action skids to get more weight transfer. just wondering if it would work on the apex.

Are you able to remove it and clean it out ?

Hey where is that check valve ? Is it where the hose connects to the gas tank or on the throttle bodies somewhere ?

I have an 07 apex gt with an excell exhaust and ram air. It keeps wanting to stall especially when it warms up and after long high speed runs. Thought it might be the throttle position sensor so I changed that but still doing it. Tried turning the idle speed up but still didn't help. I have a...

Razors are awesome. They give a bit more floatation over stock and handle great. Very durable too.

A friend of mine is a welder and has done 2 rails on my sxr, 2 on my srx, 2 on my rx1, and 2 on my apex. Never had a problem with any of them after but he does good work and is very meticulous. But yes done properly they will last a long long time.

My 07 Rtx works great on water seems like it would go forever. Have easily done 500-600 foot stretches. Can even slowly let off the gas let her slow down then crack her open pick up the skis and speed up. My 06 Rtx was not nearly as good though didnt keep the skis off as well and would start to...

so after not being able to find what i'm looking for i am going to make my own drop brackets. i was going to extend the stock brackets enough to move the bolt hole an inch lower. my question is will lowering the rear mounts by an inch throw the geometry of the skid off ? will i have to lower...

if youre gonna do them might as well do all 4 they will look awesome and you can do all the busings at the same time.

i have already added about a 1/2" to 3/4" of hifax to the tunnel protectors but i'm still having issues. i do alot of high speed wot lake running so i'm sure your right about the track ballooning at high speeds. and i'm sure hard braking at those speeds would do it too as the track wants to keep...

cool thanks i'll try timber. I'm not looking for much I run excell exhausts on my 2 apexes and i'm having issues with the studs hitting the mid pipe. so i'm just looking to drop it a half inch to an inch because whatever i drop it down i will gain in clearance between the studs and exhaust. i'm...

Does anyone know if anyone makes drop brackets for the apex? Or how much lower the mountain brackets are?

frosty i agree when i take slides off with stock wheels there are very large waves. with oversize wheels they are virtually flat the whole way

sorry shoulda broken that sentence up the oversize rears only are off a 79 srx.

i installed oversized oem polaris wheels all over and larger rears. they are off a 79 srx i believe 7.5 inches instead of 7 inches and added a marginal wheel kit to the bend on the rail. i can easily get 4000 plus kms on a set and even when i change them they still have a little ways to go and...

will do might get my buddy with a plow on his 4 wheeler to make me a nice test strip this weekend if he's around. but i will for sure post some result when i can get some good testing done.

hey Darren i never had a chance to run it in good conditions we got a bunch of snow right before i put the 23 gear in so the lake was no good anymore for speed runs. not sure what to tell ya. it definately pulls harder off the line and in the midrange though. it didn't feel like it lost anything...

i guess slowing upshift wouldn't be bad might put the power to the ground a little slower helping it to keep from spinning. and a quicker backshift is always nice for riding in the twisties. maybe i'll give it a try and see how it works.