Search results

I put 6 of the schmidt bros air pods in mine and they work fine . i took the metal snap rings out and put silicon to hold them in . Love the sound in the front when you grab the throttle. I heard that if you put 6 in it would let to much air in and fall flat at 60mph but i didnt have any...

do you mean on of the error codes? if thats waht you mean plug your handwarmers back in and unplug them while the skidoo is started and dont touch the handwarmer button you can press the thumb warmer tho. If its just the engine light i dont knoe how to get that off?\ Thanks Peter !

I just drilled and then punched out the old rivets and put the new ones in. They didnt seem to small on the diameter they were just really long. just put it on the vice and hammered it flat. Fit good and a real improvement. launches around 4100 and pulls right throught till it hits 11,200 or...

Mines pretty tight to but as long as you can turn the bars all the way both sides then you should be fine. just make sure nothing happenes like the throtle coming open Thanks Peter !

i have the SBM kit to . im putting it on tomorrow ill tell you how it works out !! Thanks Peter !

i just unpluged the grips from inside the side panels next to the headlight and then dont touch the hand warmer button or the error code will come on. I did this and had to plug them back in start it up and unplug them again. Thanks Peter !

There it is ;)! Thanks ZAKSTANG!! Thanks Peter !

Does anyone have any tips, advice, or pictures to help with installing a clutch kit? I have the instructions but i just want to make sure i have it done right. I seen a topic here with pictures that someone did and it helps with the torking the bolts on the cover and spider. so anything will...

No problem this is what the site is for . :yam: Where are you from in Newfoundland. My last name is connors ? i live in the Goulds. Thanks Peter !

No i just took the riser off. put the clamps on top put the long bolts back in and tightend them back down. theres really nothing to hard about it. Ill get the pics as soon as i can. Thanks Peter !

i will get pics next time im out at it . try turning them around or switching them. i just swaped mine out didnt run into any trouble. Thanks Peter !

I dont know what kind they are i think they might be moose they were on my bike when i bought it. I used the stock bolts and grinded down the metal ridge around the bolt at the top and then used a hack saw to cut a slit in the bolt to use a flat head screwdriver to tighten them down because i...

yea i just put them on the stock block and then my bars? should be no problem they were clamps off my dirtbike tho ! Thanks Peter !

How do you relocate your gauge pod to the top of your headlight cover? is it just cut 3 holes and use washers to hold it in place ? Thanks Peter !

Does this happen to the 08's or they have the fix ? Thanks Peter !

i did this to .. take your grips and plug them back in, start your skidoo and then unplug them, dont touch the adjuster on your bars only the thumb one and the code wont come up. Thanks Peter !

i just ordered the SBM clutch kit and cold air intake modules. I heard they were good from people on here even people that have ulmer and like this one better. Ill let you know how they are in the future. Thanks Peter !

thanks guys got it :rocks:

yes thats the problem i had im a idiot i know haha .. got it after but broke it in the process . thanks alot boys Thanks Peter !

alright thanks alot ill try tonight Thanks Peter !