rgextreme1998
Veteran
06 Apex GT sway bar - good upgrade from stock 03 sway bar?
Hey guys, turns out I can get a 2006 Apex GT sway bar and links to replace the stock 2003 sway bar and links. What size is this one and is it adviseable or just go with pioneers 13mm and 75 mm links? thanks!!

Hey guys, turns out I can get a 2006 Apex GT sway bar and links to replace the stock 2003 sway bar and links. What size is this one and is it adviseable or just go with pioneers 13mm and 75 mm links? thanks!!

I would just go with the Pioneer complete set. That way if you have a problem your dealing with 1 person.
rgextreme1998
Veteran
Thanks, i'm a little money constrained (read cheap). It's like a $100 difference. thanks again for the advice.
The Apex bar will be a help but still is not as beefy as the 13mm Pioneer setup. But you will definitely reap a reward in the handling dept.
rgextreme1998
Veteran
sounds good. might as well just pay and do it right with the pioneer stuff.
thanks
thanks
letsride
Newbie
- Joined
- Nov 20, 2008
- Messages
- 4
- Reaction score
- 1
- Points
- 683
Do i have to compress front shocks to replace the bushings?????
Thanks
Great site. New here.
Thanks
Great site. New here.
rgextreme1998
Veteran
There are 2 bushings at the ends of the sway bar where it goes into the bulk head. I lifted the front end off the ground so the skis were off the ground and did the install. I did not have to compress the front shocks.