06 Nytro riser - suggestions?

[aduesling2]

Hi there... just purchsed an 06 Nytro and am going to make some adjustments to fit me better. The first one is that I find that the handlebars are tilted/leaning back towards me to far. I know that you can't pivot the riser, but is there a way to get some tilt without going to a pivot riser? Of course if I have to I will, but my preference would be to be able to continue and use the rubber boot that is at the bottom of the steering stock. Any suggestions?
Also, would anyone happen to have a pic/description of the bolts/nuts that are used in a STOCK configuration to secure the riser block to the steering post itself. I know there is 4 of them, they should be about M8 x 25, but what do they use for nuts? A pic would be awesome..... thanks in advance, AD

 

[nytrodude]

Maybe you have already looked into this but when I got my nytro the previous owner had spun the riser 180 to get a lower/tipped back setup. I turned it back 180 and it's a pretty comfortable setup for me w/ the taller nytro seat as I am 6'4"

 

[BlkNytro]

I would get the muffin riser. The company is on here somewhere... I have the older version of the riser but they have come out with a new version. Here is a picture:

 

[aduesling2]

When you bought it did they send all hardware?? (including the bolts to bolt adapter to you steering post/stem (4 Bolts?) Also, I notice that you still use the stock rubber boot... did you have to cut it at all? Thanks, Al

 

[BlkNytro]

Yea, all hardware came with the riser. As for the "stock rubber boot" this one is off the apex not off the stock riser. I had to cut the material inside the padding a little in order for it to sit nicely. Since these pictures the pad has been altered a little so it was centered.

 

[bottlerocket]

Try Superman at Lake Effect ~ his risers rock.