1" track

[yamahahaha]

i have a 1" track with 196 studs thats almost mint, off dads old turbo rx1, i think it is a camoplast hacksaw, or maybe a carve...? my ripsaw is starting to go and most of the studs are bent on it. will the 1 inch hook up the same?

 

[yamahahaha]

the track on it now has 144 studs

 

[ShootToThrill]

Prolly won't hook quite as good but the sled will be more fun to ride. The rear won't be as planted and this helps with some of the steering issues. Put a set of pilots on it with shaper bars. You won't believe how much difference it makes.

 

[Rayman5271]

I know it sounds crazy, but I think you will find it hooks up better because of the stud pattern. And with this sled, the centered weight and the suspension design, I don't think you will be hard up with any track.

 

[yamahahaha]

even though the 1 inch has 48 more studs...

 

[ShootToThrill]

even though the 1 inch has 48 more studs...

The ripsaw has good hook on sloppy trails, slightly better than most inch tracks. Any other time it's a wash. Seems to me the ripsaw has to much bite through the corners.

 

[yamahahaha]

I know it sounds crazy, but I think you will find it hooks up better because of the stud pattern. And with this sled, the centered weight and the suspension design, I don't think you will be hard up with any track.

the 1" w/196 studs will hook beter?