I have a 2010 rtx se that I extended to144 x1 3'4" backcountry. My question is for anyone that has done this, do you have to pull up the limiter straps to put more ski pressure. I also have Can razors, sled doesnt want to turn .
C&A razors
Nine2Nine
Expert
I ran my 121" and 136" all the way down and with the 144" x 1.75" I'm back in the middle. I found the front end too light if you can imagine that, and as expected it pushes a little more.
fxnytro1050
Expert
really? kinda feels to me that it doesn't pull as much. Im having a hard time lifting the skis on flat but with a 121 1.5 on the bumper whenever you want.
Nine2Nine
Expert
2" track would lay over on hard pack would it not? I'm still out pulling the 800Cats in 660', and seeing 106 on speedo, at 100 you know you're on a 1.75" track I can tell you that.
Egon
Extreme
- Joined
- Sep 28, 2007
- Messages
- 72
- Reaction score
- 1
- Points
- 396
- Location
- Dalarna, Sweden
- Website
- www.t.kth.se
fxnytro1050 said:
I have the same feeling after stretching my -08 to 144" with 2" lugs. Will do a test and move the transfer blocks backwards. Similar to Ski doo Backcountry http://mountainblog.ski-doo.com/2012_freeride_sc-5_137/
It looks like one can move them 2 inch back by using the rear holes for the transfer blocks in the Nytro skid but it might be to much?
I have not been able to find any info
