GLENCAIRN
Newbie
- Joined
- Jan 14, 2015
- Messages
- 4
- Age
- 54
- Country
- Canada
- Snowmobile
- PHAZER GT500
Good day all. I just picked up a 2007 GT 500 Phazer and when I pulled out the old sliders off the rails. There is bad wear/damage on the radius of the rails to the front of the machine. I am going to aluminum weld them back up and machine them on my CNC mill. So I was wondering if anyone has a dimensional drawing of these rails or know the arc/radius on these? Cheers
Ruggybuggy
TY 4 Stroke Junkie
- Joined
- Sep 1, 2013
- Messages
- 727
- Location
- Kenora, NWOnt, Canada
- Country
- Canada
- Snowmobile
- 2007 Phazer FX 144
I have a used pair in the shed but have no idea on how to measure the radius for you.
Its 5 1/8 in. measured like this. Best I can do for ya. Cant you just teach by following a line by hand? Its not critical.
GLENCAIRN
Newbie
- Joined
- Jan 14, 2015
- Messages
- 4
- Age
- 54
- Country
- Canada
- Snowmobile
- PHAZER GT500
Thanks so much Cannondale27. Referring to your pic, Can you measure from the left/back of the rail along the bottom to the point the arc starts? That would help me allot...Cheers
Will get you that tonight. I think the radius ends before the spot I have measured there.
Looked again. If it ends hard to tell. Here is measurement you need. 12 inches
