TT
TY 4 Stroke Master
Is there any info if it is possible to install a 146" tack with 2.5/2.6" lugs together with 2.86 7 tooth drivers and offset rear axel with 9" rear wheel?
Or is set back of the skid, rail extensions og Iceage rail the only option? To my calculation I need to take up approx 46.4 mm or 1.83" going from 144" with 9 teeth 2.52 drive sprockets (183mm/7.219" diameter) to 146" with 7 teeth 2.86 drive sprockets (162mm/6.373" diameter)
I have googled and searched here on TY, but only information I can find with 146" track on a Nytro XTX is with a Ripsaw low lug track with 8 teeth drive sprockets
I already have the 2" 2.52 pitch track installed on my XTX, so looking for information if anybody have installed a 146" track with higher lugs than 2". I was looking into the composit talon M66 2 2ply track or the Camso peak 2.5". It would be a perfect match with mcx turbo without going all the way to 153" length track
Or is set back of the skid, rail extensions og Iceage rail the only option? To my calculation I need to take up approx 46.4 mm or 1.83" going from 144" with 9 teeth 2.52 drive sprockets (183mm/7.219" diameter) to 146" with 7 teeth 2.86 drive sprockets (162mm/6.373" diameter)
I have googled and searched here on TY, but only information I can find with 146" track on a Nytro XTX is with a Ripsaw low lug track with 8 teeth drive sprockets
I already have the 2" 2.52 pitch track installed on my XTX, so looking for information if anybody have installed a 146" track with higher lugs than 2". I was looking into the composit talon M66 2 2ply track or the Camso peak 2.5". It would be a perfect match with mcx turbo without going all the way to 153" length track
I have a 153 skid if needed—
