2003 rx1 slow jet question

[jrice1987]

So I began cleaning the carbs and could not get 2 of the #75 slow jets out had to Jerry em out..anyhow all local shop had was #72.5 slow jet will this work ok make much of a difference or should I just order 2 #75 jets. just want to get the darn thing back together.

 

[jrice1987]

So I began cleaning the carbs and could not get 2 of the #75 slow jets out had to Jerry em out..anyhow all local shop had was #72.5 slow jet will this work ok make much of a difference or should I just order 2 #75 jets. just want to get the darn thing back together.

I will be changing all 4 of course

 

[RobX-1]

I'm doing the same thing on my RX-1, replacing all the jets, needle valve assy, and o-rings. In doing so, I opted for stock jetting sizes so as to not 'dirty the waters' when getting it to run like its old self.