2004 warrior roller size

[Rx1 cowboy]

can someone tell me the size of the rollers in the 04 warriors, i want to make sure my HC's will work, thanks

 

[jtssrx]

15.6

 

[Rx1 cowboy]

Thanks, im glad they didnt go any larger, cause the heelclicker literature says they wont work with any thing larger than a 15.6 mm roller

 

[Rx1 cowboy]

i have another quick clutching question, my weights and spring have 3500 miles on them from last season, i havent installed them yet to check for slop in the bushings, but would it be recommeded to put new bushings in and replace the white spring with a ti spring of the same rate?

 

[Buckeye]

Spring

I wouldn't worry about the weights, they should be fine. A new spring is cheap and the old one is probably a little fatigued at this point.

 

[ExTrEeMF7]

that srping is good to go still..
i have a spring tester here i bought way back when to test all my springs for fatigue and tell you we had a h-c set up with 11000 kms on it and the spring was still top notch ...
i have some hauck orange and blue that i used for drags for years and still top notch

its hard for guys to tell you should change spring . the only whay to know for shure 110% is if you buy a scale for that reason ..

that is why they make them fancy tools

take alot of the guess work out and not waisting you money / tools pay for them self in the long run...