rapidroy5858
Newbie
What bushings should I install when it's time to replace them on my 05 rx1
stephenk
Veteran
I put the olite kit from ulmer racing. Great kit and better quality then stock. You will find a lot of people on Herr are using them. Think it runs about 120$ for all bushings.
- Joined
- Jun 1, 2004
- Messages
- 7,759
- Location
- sudbury on
- Country
- Canada
- Snowmobile
- 2016 apex xtx
2011 apex xtx
2009 phaser rtx/x
1997 et410t/r
1988 vk 540
oillite is the best and they are available from Yamaha and ulmer racing. link for step by step.
http://www.ty4stroke.com/viewtopic.php? ... highlight=
http://www.ty4stroke.com/viewtopic.php? ... highlight=
fryguy
Veteran
I just put the Oilite bushings from Ulmer in my 05 RX1 before this season. HUGE difference now that the front end is tightened back up. Handles like a new sled again! Take your time and use the bolts to suck in the new bushings instead of hammering them in. Ulmer's kit has numbers written on them as some of the bushings look identical to the eye but are in fact different spec'd. The link that Maim posted is what I followed as well.
