smokum613
Extreme
- Joined
- Dec 14, 2015
- Messages
- 54
- Reaction score
- 5
- Points
- 98
- Location
- Edwards, Ontario
- Country
- Canada
- Snowmobile
- 2011 Apex SE w/Yamacharger
Is there a way to make the brake light come on easier without locking the track ?
My brother was behind me and says he never sees my light come on unless I'm near stopped or hard stopping even though I'm tapping the lever, and I typically like to light tap the brake as I'm intending to slow or want to warn anyone behind me that I'm slowing. But I'm track locked (hard braked) to activate the light, and I find the brake sensitive enough that I don't/won't ride with my finger(s) resting on the lever.
TIA
My brother was behind me and says he never sees my light come on unless I'm near stopped or hard stopping even though I'm tapping the lever, and I typically like to light tap the brake as I'm intending to slow or want to warn anyone behind me that I'm slowing. But I'm track locked (hard braked) to activate the light, and I find the brake sensitive enough that I don't/won't ride with my finger(s) resting on the lever.
TIA
You can take the switch off at the brake lever. Remove the rubber boot to expose the switch. The two wire that go to the switch are secured via a Philips head screw. The is a slight amount of adjustment on the copper tab that goes into the switch itself.
