ThatBlueVmax
Newbie
- Joined
- Nov 4, 2019
- Messages
- 11
- Reaction score
- 0
- Points
- 61
- Location
- New Brunswick
- Country
- Canada
- Snowmobile
- 2011 Yamaha Nytro XTX
Looking to purchase a power up kit for my 2011 Nytro XTX or the parts to make one. I see Hurricane does not offer the kit anymore and Hindle does not offer the exhaust anymore either. Looking for ideas on other alternatives that people have made work! The pc5, air breathers, won’t be an issue but the exhaust, clutching, is what I am concerned about. MBRP still makes a header for these sleds I see as well. Any help is appreciated! Located in Eastern Canada as well.
Kurt J
Pro
- Joined
- Apr 10, 2019
- Messages
- 151
- Reaction score
- 109
- Points
- 303
- Location
- Michigan
- Country
- USA
- Snowmobile
- Nytro
Hurricane flash with an exhaust and air box mod like Schmidt Brothers. Clutch accordingly.
ThatBlueVmax
Newbie
- Joined
- Nov 4, 2019
- Messages
- 11
- Reaction score
- 0
- Points
- 61
- Location
- New Brunswick
- Country
- Canada
- Snowmobile
- 2011 Yamaha Nytro XTX
I questioned a MBRP header, have a SKINZ ultra Q currently as well.Hurricane flash with an exhaust and air box mod like Schmidt Brothers. Clutch accordingly.
Stubbs
TY 4 Stroke Master
- Joined
- Nov 7, 2006
- Messages
- 1,160
- Reaction score
- 676
- Points
- 1,378
- Location
- Uxbridge, On, Can.
- Country
- Canada
- Snowmobile
- ‘16 Apex XTX with 137” Mono II
+ other gooodies
- LOCATION
- Uxbridge ON
I’ve been told if you contact Hindle directly you can still have the full exhaust system built, but haven’t inquired directly because I already have one. The full kit with Hurricane Dave’s airbox mod and PCV works really well. If you track down the pieces I can point you in the right direction clutching wise with Dalton tuning pieces.
Not sure if Al Ulmer of Ulmer racing still offers packages if you contact him directly or not, but his kits always ran very well too.
Not sure if Al Ulmer of Ulmer racing still offers packages if you contact him directly or not, but his kits always ran very well too.
ThatBlueVmax
Newbie
- Joined
- Nov 4, 2019
- Messages
- 11
- Reaction score
- 0
- Points
- 61
- Location
- New Brunswick
- Country
- Canada
- Snowmobile
- 2011 Yamaha Nytro XTX
Almost impossible to locate a Hindle system here (In Eastern Canada) and I know the exhaust is crazy expensive if still available. Was curious on a MBRP header?
radianguy
TY 4 Stroke God
- Joined
- Jan 1, 2007
- Messages
- 1,930
- Reaction score
- 101
- Points
- 1,058
- Location
- Corner Brook Newfoundland, Canada
- Country
- Canada
- Snowmobile
- 2009 Yamaha FX NYTRO XTX 1.75
Curious as to what Dalton weights you are using? I bought a set last year after my supertips wore near the tips. I haven't had much luck getting them to perform like the supertips did.I’ve been told if you contact Hindle directly you can still have the full exhaust system built, but haven’t inquired directly because I already have one. The full kit with Hurricane Dave’s airbox mod and PCV works really well. If you track down the pieces I can point you in the right direction clutching wise with Dalton tuning pieces.
Not sure if Al Ulmer of Ulmer racing still offers packages if you contact him directly or not, but his kits always ran very well too.
Stubbs
TY 4 Stroke Master
- Joined
- Nov 7, 2006
- Messages
- 1,160
- Reaction score
- 676
- Points
- 1,378
- Location
- Uxbridge, On, Can.
- Country
- Canada
- Snowmobile
- ‘16 Apex XTX with 137” Mono II
+ other gooodies
- LOCATION
- Uxbridge ON
3 holers seem to be hard on weights. I had been running the QAY 54, but grabbed a set of the 58’s to try this year, but haven’t had snow to set them up yet. Shoot me a PM and I’ll see if I can help.Curious as to what Dalton weights you are using? I bought a set last year after my supertips wore near the tips. I haven't had much luck getting them to perform like the supertips did.
ThatBlueVmax
Newbie
- Joined
- Nov 4, 2019
- Messages
- 11
- Reaction score
- 0
- Points
- 61
- Location
- New Brunswick
- Country
- Canada
- Snowmobile
- 2011 Yamaha Nytro XTX
Contacted Hindle, sadly they no longer produce the exhaust system, they said they’re focusing more on street bikes and track racing.I’ve been told if you contact Hindle directly you can still have the full exhaust system built, but haven’t inquired directly because I already have one. The full kit with Hurricane Dave’s airbox mod and PCV works really well. If you track down the pieces I can point you in the right direction clutching wise with Dalton tuning pieces.
Not sure if Al Ulmer of Ulmer racing still offers packages if you contact him directly or not, but his kits always ran very well too.
Stubbs
TY 4 Stroke Master
- Joined
- Nov 7, 2006
- Messages
- 1,160
- Reaction score
- 676
- Points
- 1,378
- Location
- Uxbridge, On, Can.
- Country
- Canada
- Snowmobile
- ‘16 Apex XTX with 137” Mono II
+ other gooodies
- LOCATION
- Uxbridge ON
Sorry to hear that, it’s a shame.Contacted Hindle, sadly they no longer produce the exhaust system, they said they’re focusing more on street bikes and track racing.

Dr. FeeLGooD
VIP Member
I really like my Ulmer package.I’ve been told if you contact Hindle directly you can still have the full exhaust system built, but haven’t inquired directly because I already have one. The full kit with Hurricane Dave’s airbox mod and PCV works really well. If you track down the pieces I can point you in the right direction clutching wise with Dalton tuning pieces.
Not sure if Al Ulmer of Ulmer racing still offers packages if you contact him directly or not, but his kits always ran very well too.
Similar threads
- Replies
- 4
- Views
- 3K
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.