I am looking for a detailed write up on doing a cooler/heat exchanger mod to fit a 3" track in a Nytro Mtx. I thought I saw a good one a couple months ago with pics etc but have not been able to locate it again. Any help will be appreciated.
Pooh nanny
Newbie
- Joined
- Oct 8, 2012
- Messages
- 2
- Reaction score
- 0
- Points
- 31
I'm looking for the same information. Only company i'm aware that doesn't the mod is CRracing in Canada. Is this something you can modify yourself?
http://crracingcanada.com/main/sled/yamaha/nytro/tunnel/nytro-cooler-mod-kit-for-3-track.html
http://crracingcanada.com/main/sled/yamaha/nytro/tunnel/nytro-cooler-mod-kit-for-3-track.html
I bought the modified cooler kit with the aluminum shield from someone that had it modified and it looks very similar to the CR Racing version. I already have the 3' track too. My sled is torn apart in the garage and I am trying to decide how much more to tear it apart as it is a bigger project than I expected. I am looking forward to having it done but was hoping to find the write up on the project. CR does have instructions but they are pretty basic and leave out a lot of detail for the do it yourselfer if you know what I mean.
tapex_07
TY 4 Stroke Master
- Joined
- Feb 15, 2009
- Messages
- 1,160
- Reaction score
- 135
- Points
- 1,038
- Country
- USA
- Snowmobile
- '10 Nytro MTX SE IMPULSE 174x3
'14 Viper XTX SE MPI 159x14x1.25
'07 Apex RTX SC2 MPI 128x1
I did it to my 10. No kit, cut and modified the cooler, added MPI tunnel coolers and modified the front portion of the tunnel. I had it down to the tunnel and side plates only. There's a lot of work to be done to the front portion of the tunnel! I recommend buying someone's kit.. CR or Terra (
http://www.terraalpsracing.com/product/nytro-stock-chassis-tunnel-kit) it's in the second to last paragraph.
http://www.terraalpsracing.com/product/nytro-stock-chassis-tunnel-kit) it's in the second to last paragraph.
