4 fighter seat mod

[4bangdan]

did a four inch high density seat foam mod and i find this to be the best mod on 03 rx-1 so far! six foot 5 inches tall, find this to be a mandatory mod. also 2 inch non pivot riser with bars turned foward. my two cents!

 

[nhrxrider]

What did you use for a seat cover to cover the extra foam? And how did you shape it so that there is still a rise at the back of the seat...or did you eliminate the rise? I'm 6'4" and am interested in this!

Jim

 

[firecat]

pic of seat mod reused the seat cover
________
Coach handbags

 

[Yama-Crazy]

kinda looks like the tank cover is tight to the seat....maybe too tight?? Or is it good and not going to wear into the seat?

 

[otis]

Those are pics of my sled and the seat is still working great. 400 miles later and no problems except no sore back. From my previous post you get a better idea of what it looks like. That angle makes it look funny.

http://www.ty4stroke.com/viewtopic.php? ... highlight=

Otis

 

[Yama-Crazy]

I can see a seat mod in my future looks great!

 

[4bangdan]

my seat mod looks the same but not as far to the tank, used a 7 inch sander to shape foam and 3m spray adhesive, no material added to seat cover, just stretched it back to position. to crush 4 inches of h.d. foam for stappeling, i laid the seat upside down over 20" log, laid a 2 by 4 lenthwise over plastic seat back and crushed seat down with two very heavy objects, [a 1971 442 convertible and an 03 rx-1] not sure wich is heavier but they both served the purpose perfectly! very easy to stapple!

 

[Bum7272]

I did my 03 with 5" foam work's great 600 mi