Helgy
Extreme
- Joined
- Jul 16, 2010
- Messages
- 62
- Reaction score
- 0
- Points
- 186
- Location
- Stewart B.C.
- Country
- Canada
- Snowmobile
- 03 RX-1 Mountain MCX
The issue was the plug on the voltage regulator and pins, it had been welding in there and the pin was almost ready to fall off (red wire), and the plug was almost all gone. I cut off the plastic plug retainer, then soldered wires onto the pins, then put the cut off plastic back in place and filled it with high temperature glue. So now I have pigtails on my regulator with new plugs. Its working for now, at least its not the stator!.