Frozenstiff
TY 4 Stroke Junkie
- Joined
- Dec 24, 2009
- Messages
- 616
- Location
- Prescott, Ontario
- Country
- Canada
- Snowmobile
- 2013 Arctic Cat Turbo
If so, which brand of track, and how deep a lug ?
Gravedigger
Lifetime Member
track
i have a 14x128 cat 1'' hacksaw speed track love it
i have a 14x128 cat 1'' hacksaw speed track love it
yamahahaha
TY 4 Stroke Junkie
would a 14 inch wide track go rite on? or have to change bogies n w.e
maxdlx
Lifetime Member
14 goes right on I ran one on my viper for a year
yamahahaha
TY 4 Stroke Junkie
is a 14 inch better or worse out of the hole? or top end
spddmon
Lifetime Member
i ran a 1 inch hacksaw 14by121 fitment for a phaser top end 2-5 mph increase hole shot was ok not much difference, as for installation no mods needed to suspension just like changing for the same track
yamahahaha
TY 4 Stroke Junkie
hmmwhat about a 13.5" wide track. cuz i want a 1.375" lug. or is that track too skinny
170plus
TY 4 Stroke Junkie
- Joined
- Jan 14, 2004
- Messages
- 541
- Location
- washburn maine
- Country
- USA
- Snowmobile
- 2021 polaris assault 850,18 sidewinder ltx,14 nitro xtx,06 apex rtx,
i have a 13.5 x 128 on my 06 rtx,had to move the upper wheels and rear wheels in by putting washer on outside of bearing instead of inside and added 1/2" to the loops on the very top front mount on skid,have run it for 2 years now with no issues,all other wheels are fine
Similar threads
- Replies
- 14
- Views
- 4K