BryanK410
Veteran
- Joined
- Jan 26, 2014
- Messages
- 48
- Reaction score
- 9
- Points
- 808
- Location
- Newfoundland
- Country
- Canada
- Snowmobile
- 2009 Apex MTX
Hey,
Got an 162"x16"x2.5" challenger extreme ordered for my 09 Apex MTX. Is it very doable in the garage? Or should I haul it to a dealer 2 hours away? Thanks
Got an 162"x16"x2.5" challenger extreme ordered for my 09 Apex MTX. Is it very doable in the garage? Or should I haul it to a dealer 2 hours away? Thanks


- Joined
- Jun 1, 2004
- Messages
- 7,837
- Reaction score
- 2,037
- Points
- 2,103
- Location
- sudbury on
- Country
- Canada
- Snowmobile
- 2016 apex xtx
2011 apex xtx
2009 phaser rtx/x
1997 et410t/r
1988 vk 540
if you have a track stand, it is not too bad a job. there are detailed write ups in the tec section on the drive axle removal. i replaced the track on my apex with a buddy in less than 3 hrs whitch shocked me as i had done it on rx wars before and those always took me about 4 hrs with suspension install.
could you please add your location as per site rules? thanks.
could you please add your location as per site rules? thanks.
BryanK410
Veteran
- Joined
- Jan 26, 2014
- Messages
- 48
- Reaction score
- 9
- Points
- 808
- Location
- Newfoundland
- Country
- Canada
- Snowmobile
- 2009 Apex MTX
Cool thanks, ill look into those post.
Also, I use to be a VIP member here called Auskins, but seems my old account is no longer active after years of absence.
Also, I use to be a VIP member here called Auskins, but seems my old account is no longer active after years of absence.


- Joined
- Jun 1, 2004
- Messages
- 7,837
- Reaction score
- 2,037
- Points
- 2,103
- Location
- sudbury on
- Country
- Canada
- Snowmobile
- 2016 apex xtx
2011 apex xtx
2009 phaser rtx/x
1997 et410t/r
1988 vk 540
Contact mrsled on that as the site upgraded over the summer and there are login issues for some users.
Similar threads
- Replies
- 1
- Views
- 869