Apex Reverse.

[SledFreak]

I need to change my gearing for some local drags and I'm not real good at hooking up the forks for the reverse linkage. Once I disconnect the linkage, change the gear and then try to hook up the forks, for the reverse I just can't seemed to do it and I have to call my buddy over. What am I missing. Does anyone have a diagram or step by step on what too look for. Thanks....

 

[Shivesy]

I did a write-up on this last year. Check the link below. I hope this will answer your questions. Go to page 2, #21.
http://www.totallyamaha.com/snowmobiles ... 20prt1.htm

 

[SledFreak]

Thanks, that has helped alot, but do have a pic of the inside of the cover to show the fork? I have not torn into yet, but I know I have to do it and I always put it off until the last thing I have to do, because I hate doing it. It takes me forever... That's one thing I miss about my DOO, took me 20 minutes to change a gear on my old REV. These things are a bitch.