attak shock removal

[stinx]

A while back it was posted how to remove the shock from a Attak W/o removing the skid. I have used the search feature but cant find it. could somebody direct me to this .Thanks

 

[gkw]

Just remove the two bolts holding it in AND the 3 screws holding the tunnel adjuster.

You will also need to remove the rear bolt holding the transfer rod.

GW

 

[black700]

do not take the 3 screws off the tunnel adjuster,take one bolt off the transfer rod and remove the 2 bolts from the shock and pull back the little boot that is on the shock for the remote adjuster your gonna have to tug on the boot then get some pliers to loosen the adjuster and take off.when done put the shock back in it will be easier to get a jack and jack the front skid up a little to put the front bolt in the shock put the back one in first dont foreget to put the bolt back in the transfer rod thats it good luck