culvert
Expert
I have a used RX-1Mtn. It came with the ECP kit on and prefilters.
Out today in knee deep powder @ -20. Sled ran great first 2 rips across the filed. Then once warm it bogs really bad on top end. Still lots of punch on bottom and take off.
The hood has all the hood vents covered with nylon stockings(old owner). There is tons of snow getting in the nose of the sled where the tool box use to be. Also lots of steam underhood. I think with the vents covered the steam has nowhere to go.
Anybodys with ECP's cover there vents? I'm thinking of pulling them as there was lots of snow underhood anyway. Also tried turning on the carb heater and bog only got worse.
Thanks for the help guys.
Out today in knee deep powder @ -20. Sled ran great first 2 rips across the filed. Then once warm it bogs really bad on top end. Still lots of punch on bottom and take off.
The hood has all the hood vents covered with nylon stockings(old owner). There is tons of snow getting in the nose of the sled where the tool box use to be. Also lots of steam underhood. I think with the vents covered the steam has nowhere to go.
Anybodys with ECP's cover there vents? I'm thinking of pulling them as there was lots of snow underhood anyway. Also tried turning on the carb heater and bog only got worse.
Thanks for the help guys.
Black 1000
TY 4 Stroke Junkie
Now this is just a thought but there was an update to the float bowls for the mountain. But I am not familiar with it as I am a flatlander. 
SUPERTUNER
TY 4 Stroke Master
- Joined
- Aug 16, 2003
- Messages
- 1,257
- Reaction score
- 2
- Points
- 691
- Location
- Waterbury, Connecticut
- Website
- www.easterncycleperf.com
What size main jets? Try richening needles too.
