APEX 06
TY 4 Stroke God
- Joined
- Apr 30, 2009
- Messages
- 4,016
- Location
- Sheboygan, WI
- Website
- www.sheboyganyamaha.com
- Country
- USA
- Snowmobile
- 09 Nytro XTX, 08 Apex Mtx
I have a 06 apex rtx that I what higher bars then stock with out change the cables. And dose someone have one for sell. Thanks.
I have the mountain riser on mine (8" tall--good for up to a 6' rider) and I can go without the longer cable. I would'nt go much higher though.
Contact Superman on here. I have one of his risers. NICE NICE STUFF!!!
He has a thread in here in the classifieds
http://www.ty4stroke.com/viewtopic.php? ... highlight=
and his web site is http://www.lakeffectsnow.com but I don't think he has launched the site yet....
Contact him though. He will know what you can get away with for a rise...
He has a thread in here in the classifieds
http://www.ty4stroke.com/viewtopic.php? ... highlight=
and his web site is http://www.lakeffectsnow.com but I don't think he has launched the site yet....
Contact him though. He will know what you can get away with for a rise...
Turtle
Lifetime Member
- Joined
- Feb 27, 2006
- Messages
- 1,340
- Location
- Marathon, WI
- Country
- USA
- Snowmobile
- '17 Polaris Switchback 800 Pro S LE
'15 Viper RTX SE w/ MPI turbo - sold
'07 FX Phazer GT
Many have used our 6" riser setup. Our adapter block is machined so you can retain use of the stock chrome trim ring. The adapter block and 6" risers totals 8.5" of rise when measured from the top of the steering post. With this setup you will not need to change/extend and cables or hoses.
jodee nichols
Newbie
I used the mountain riser, works great.
