Battery replacement on 2006 Vector

NotEnufToys

Newbie
Joined
Nov 11, 2008
Messages
2
Reaction score
0
Points
211
Location
Sparta, NJ
Kinda a newbie here. Any help would be appreciated!
Trying to save a few bucks that the dealer would charge.
Thanks.
 
Just make darn sure you get the breather tube on the bottom hooked back up properly!! It's kind of a pain to get the clip back on..Other than that no big deal..
 
Also ensure that when you put the airbox back on, that the carb boots are seated fully. I have found that you need to loosen up the clamp screws a good amount to get proper seating when you put the box back on.
 
There appears to be 3 tubes coming out of the airbox. 1 thicker one and two smaller ones. The third tube must have come out when i moved the box to get at the battery, does anyone know if all 3 get connected. I can't seem to find where the 3rd one connects too???

Thanks guys.
 
There is one near the front of the airbox that is just a vent tube, it does not connect to anything. Ensure it hangs down straight so mositure can escape as necessary.
 


Back
Top