catyamman
Newbie
Has anyone installed a blow off valve on a MPI s/c non efi?
I'm told it will not help the s/c setup. Is this correct? Thanx...
Jerry
I'm told it will not help the s/c setup. Is this correct? Thanx...
Jerry
monker
TY 4 Stroke Guru
Yes I have. It seemed to help, but I haven't been in the same conditions as where I had the original problem. I'll know more once asphalt season starts.
millstreet
Lifetime Member
- Joined
- Dec 6, 2005
- Messages
- 448
- Reaction score
- 23
- Points
- 993
- Location
- doylestown, pa and old forge, ny
- Country
- USA
- Snowmobile
- current - 2018 Sidewinder ltx-le 50th
When talking with Mac at MPI approx 1 month ago, he mentioned an adjustable blowoff/boost controller/boost limiter idea being in the works.
The idea here would be to have the ability to switch boost levels with the
flick of a switch-you would have 26-22 cogs but could run low boost or
high boost. The only downside would be the parasitic(?) loss of running the higher gearing when you didn't need the boost.
Stay tuned!
The idea here would be to have the ability to switch boost levels with the
flick of a switch-you would have 26-22 cogs but could run low boost or
high boost. The only downside would be the parasitic(?) loss of running the higher gearing when you didn't need the boost.
Stay tuned!
