boost referenced timing retard for RX1

[mmmkokanee]

what are my options, if any, for an rx1 with a bender rear mount. I wanted the synergy boost box, but there isn't one for the rx1 yet.
I want to run a stock engine with moderate boost on pump premium for trail riding.
I was also looking at the MC-4 msd, but not sure where to start as a baseline for tuning and how hard is it to install with the pickup in the stator housing?
Any suggestions would be appreciated and prices as i know a couple guys on this site sell the mc-4.
I was talking to John Pizzuto from JandS electronics about their safeguard boost and knock retard, but he said it won't work with the cdi ignition output. He was very helpful, but would need a whole sled there to make it work i think.
thanks
chris

 

[summitking]

sled

The synergy rx1 timing box is on the way mitch has the boxes but hasnt had a RX1 to make the plugs for yet.

 

[mmmkokanee]

old, outdated sled! If i could afford a new nytro or apex there wouldn't be any probs i guess

 

[summitking]

sled

Nothing wrong with the rx1 id like to build one just as a drag sled lol. Im going to synergys shop this weekend ill make sure he gets a rx1 lined up and gets some boxes out there

 

[Ted Jannetty]

what are my options, if any, for an rx1 with a bender rear mount. I wanted the synergy boost box, but there isn't one for the rx1 yet.
I want to run a stock engine with moderate boost on pump premium for trail riding.
I was also looking at the MC-4 msd, but not sure where to start as a baseline for tuning and how hard is it to install with the pickup in the stator housing?
Any suggestions would be appreciated and prices as i know a couple guys on this site sell the mc-4.
I was talking to John Pizzuto from JandS electronics about their safeguard boost and knock retard, but he said it won't work with the cdi ignition output. He was very helpful, but would need a whole sled there to make it work i think.
thanks
chris

I can set you up with a complete MC4 package with base maps and tech help.

Ted.

 

[mmmkokanee]

thanks summitking...i don't want to start putting on the kit and have it sitting there because i can only run race fuel with stock compression. I would prefer the synergy box over replacing the entire ignition, but i will if have to.
I'd love to have your sled with the midmount, but wife and 2 young kids=NOT A CHANCE!
We've got big storms in mid oct. before and its all gone in a day or 2 and a gt snowracer won't cut it!.
I went for a rip in the grass last night just to feel it once more before boost!

Ted, send me a price on the mc-4 with a map sensor.
thanks
chris

 

[Ted Jannetty]

1600.00 with good base map

Ted.

 

[mmmkokanee]

anyone know if the rx1 box is ready yet...turbo is on, just need to tune it

 

[mulot30th]

If your turbo is not sidemount, you can safely use ted's MC4 on your rx1. Its better than the synergy box.

 

[lakercr]

As of yesterday, Synergy's box for the RX is not yet available.