Red2003
TY 4 Stroke Guru
I wont be bolting everything up for good until I get 'em painted and the throttle cable here, but I will post a pick ASAP. They look sweet on there. Like the Apex, only a little meaner. Very works....
Red2003
TY 4 Stroke Guru
Hi guys,
OK, the Cat Sno Pro bars (straight type) with the PowerMadd pivot adapter and 8" riser are just 36 in. from the running board at the footwell to the middle of the bars. I have the riser pivoted strait up and down, perpendicular to the ground. I am 5'9" and standing straight up on the sled the bars are an inch or so above my hips. Feels perfect. The stock bars are about 29" pivoted all the way forward, so this is quite a rise. I would not advise that much if you're keeping the stock seat as it would kinda feel like driving a Harley while sitting down. I'll get pics when I get the new throttle cable in and the green paint covered up!
OK, the Cat Sno Pro bars (straight type) with the PowerMadd pivot adapter and 8" riser are just 36 in. from the running board at the footwell to the middle of the bars. I have the riser pivoted strait up and down, perpendicular to the ground. I am 5'9" and standing straight up on the sled the bars are an inch or so above my hips. Feels perfect. The stock bars are about 29" pivoted all the way forward, so this is quite a rise. I would not advise that much if you're keeping the stock seat as it would kinda feel like driving a Harley while sitting down. I'll get pics when I get the new throttle cable in and the green paint covered up!
Phantom
Expert
- Joined
- Apr 2, 2004
- Messages
- 451
- Reaction score
- 1
- Points
- 721
Thanks for the numbers.
My stock Rage is 30" bar to footwell and the seat is 16" high from the running boards, these are the same measurements as a stock Sno-Pro.
This surprises me, I swaped with a friend of mine last season and the Pro felt so much higher to me than the Rage. I think the 8" is a bit to highfor me I'll try the adaptor and a 2" riser with the stock bars and see.
My stock Rage is 30" bar to footwell and the seat is 16" high from the running boards, these are the same measurements as a stock Sno-Pro.
This surprises me, I swaped with a friend of mine last season and the Pro felt so much higher to me than the Rage. I think the 8" is a bit to highfor me I'll try the adaptor and a 2" riser with the stock bars and see.
