RAMSOMAIR
TY 4 Stroke God
What studs are those Marc?
yamamarc
TY 4 Stroke God
- Joined
- Sep 29, 2013
- Messages
- 3,051
- Location
- Massey Ontario
- Country
- Canada
- Snowmobile
- 2019 zr9000 Ltd
Megabites
no1b4me
Expert
Marc.... Does the Biteharder tool fit inbetween the doubles or did you have to remove one of them to be able to sharpen the stud points properly....?
Also which Biteharder tool the standard one or the professional grade?
Thanks
Rob
DMCTurbo
VIP Member
- Joined
- Nov 12, 2005
- Messages
- 2,786
- Age
- 51
- Location
- Val Caron, Ontario
- Country
- Canada
- Snowmobile
- 2017 Sidewinder XTX LE 137
You have to remove 1 of them. I have the standard and I've sharpened my 144 studs a couple times and its still working fine.
no1b4me
Expert
Excellent... Thanks
Top belt guard from a Nytro. Now a belly pan protector. Did this on my Nytro also.
Turboflash
Lifetime Member
- Joined
- Mar 18, 2019
- Messages
- 2,663
- Location
- Southern MN
- Country
- USA
- Snowmobile
- '17 ZR9000 Ltd. 137 - PEFI Stage 4
I'm also a cheapskate but sometimes it's because there's nothing on the market that I think is good enough. So I make/build my own.
For example, my belt guard is full-circle wrapping all the way around the back too. Most on the market only cover front and stop at the two bolts on the caliper housing leaving the back open. (Older pic).
For example, my belt guard is full-circle wrapping all the way around the back too. Most on the market only cover front and stop at the two bolts on the caliper housing leaving the back open. (Older pic).
Attachments
ssgzag15
Extreme
Poor mans CAI, aluminum coil stock and gorilla tape
yamadoo
Yamadoo is a snowmobile ' aholic'.
- Joined
- Jun 3, 2003
- Messages
- 3,645
- Country
- USA
- Snowmobile
- 15 Viper STX DX red/white- GPS and KING AIR suspension 4kmiles
13 Apex XTX 45 anniversary RED/WHITE/BLACK 3K miles
10 Vector LTX Blue 9kmiles
11 Venture GT 4k miles
86 SnoScoot(2) for grand kids
I have used black adhesive either tape or carbon fiber Decal to cover prior hack job Mirror mounts on my Apex. I bought used and the prior owner had these terrible uselessly mounted mirrors on the side panels. Totally destroyed the Stock decals.....so after staring at it forever I decided I could continue some lines of black and maybe it would look ‘OK’. Well until I pointed the repair out no one had noticed it. New decals were >170$ per side, Black taper- 5$, that’s Cheap all the way to CHEAP SKATE.
Oh ya on my VIper, my nephew had a ‘Boo Boo” and ,bent and scraped a portion of the paint off the after market ‘cool’ bumper, so out comes the ratchet straps, dead blow hammers =>straight and Carbon fiber Decal and Black tape-in this case Electric tape stretched just right is the perfect match, I cant see it and no one has ever commented to me. I have to study and feel to find it. Again CHEAP.
Oh ya on my VIper, my nephew had a ‘Boo Boo” and ,bent and scraped a portion of the paint off the after market ‘cool’ bumper, so out comes the ratchet straps, dead blow hammers =>straight and Carbon fiber Decal and Black tape-in this case Electric tape stretched just right is the perfect match, I cant see it and no one has ever commented to me. I have to study and feel to find it. Again CHEAP.
Last edited:
Not my Sidewinder, still waiting for parts on that. Did a tail light hack and bolted this on. Was a box for old obsolete equipment that I cut down to size and re riveted it back together. Cheap and effective . Doesnt melt and things inside do not freeze. It is ugly but I am a cheapskate lol. And good storage is hard to find for a Nytro. I have about 2000 miles on this box, including a couple roll overs.
