CR10EK Plugs

[FxNytro2010]

do you recommend putting CR10EK Plug in a nytro?

 

[basic700]

Yeap

 

[raginyamaha]

 

[Yama 1000]

I run them in my nytro. No problems, work great.

 

[fxnytro1050]

Put them in the beginning of this season. No problems yet. All i found was she was idling lower. Instead 15-1600 it was more like 14-1500rpm.

 

[Apex2006]

Yep, run them in my Nytro, Apex, and R-1. It psychologically gives me 2 more HP LOL!!

 

[canoehead]

Yep, run them in my Nytro. It psychologically gives me 2 more HP LOL!!

X2

 

[NBSledHead]

What r u guys gapping them to?

 

[canoehead]

They come pregapped but I believe it's .028 They're a dual electrode.

 

[NBSledHead]

I just got some tonight but just wanted to make sure
I could use them straight out of the box at the factory gap
Thanks for the info

 

[canoehead]

I just got some tonight but just wanted to make sure
I could use them straight out of the box at the factory gap
Thanks for the info

 

[09nytro]

If your sled is all stock I would run the stock plugs...you will never feel 2hp ......all the guys running these plugs have mods done.....I ran them once did not feel any diff. Just fouled one out so stock plugs back in....Now when doing mods every Hp counts....just my 2cents

 

[SPARK23CA]

just took 3 of these colder awesome plugs out covered in fuel ....putting normal ones back in

 

[snowfever27]

I ran the CR10EK in my Viper for one season. I did the free air box mod but that’s it, I have no other mods to the engine. I didn’t feel any difference between the CR9 and CR10 plug. The 10’s seem a bit darker in color after a full season. I’m going to run CR9EK this season, if I ever get any snow here (I’m in VT). Dual electrode but same heat range as stock.

 

[Gone Blue]

I am running Cr10EK plugs with a Schmidt Bros cold air box mod. Dont know if runs any better than stock as I did these mods before I ever rode the sled, but it runs great! G.B.