dalton dpy 60 weights

[tedgoesfast]

has anyone had trouble with getting these weights set up properly with a red spring geared down 2 teeth it still is pulling tach back to 10000 rpm on top getting really frustrated with these weight i think iam going to throw them in the junk pile and start over

 

[grader]

the weights are probably too heavy. the dpy 57.5 is the one you want. the profile on these is very aggressive, similar to the 8dn yamaha weights. you could probably run 60 or 62 gram dpyr daltons. the weights are good quality but if you want to toss them, toss them my way.dont know your secondary setup but the red dalton there is also a good spring.

 

[tedgoesfast]

weightd

i ended up moving 3 grams off of toe and putting it on the heel alot better also changed belt dale at dalton said they have had some trouble with the belts from yamaha causing this issue if so the belt must be to short