mr-cave
Newbie
- Joined
- Nov 26, 2010
- Messages
- 1
- Reaction score
- 0
- Points
- 101
Hi
Im wondering wich cable i have to ground to access the CO adjust mode.
There has been some threads about this but i recon no one specific for Phazer??
I have tried to ground a light green cable that attaches to the left in the box. But nothing happened......
I only entered DIAG and then the standard diag mode...
Anyone have a picture or a how too (specificly for the Phazer would be nice)
Mine is a 2010 RTX
Please help me if you can.
(sorry if my spelling isnt right, im from sweden...)
Im wondering wich cable i have to ground to access the CO adjust mode.
There has been some threads about this but i recon no one specific for Phazer??
I have tried to ground a light green cable that attaches to the left in the box. But nothing happened......
I only entered DIAG and then the standard diag mode...
Anyone have a picture or a how too (specificly for the Phazer would be nice)
Mine is a 2010 RTX
Please help me if you can.
(sorry if my spelling isnt right, im from sweden...)
Look for the pale green wire in harnes down by the battery.
rotax454
Pro
Cannondale, Thanks for the link. Boy, I sorta feel like a dummy now for ordering/installing the Schmidt fuel regulator. I could have just changed the MAP. Have you played around with a programmer yet? That is really the way to go. You can adjust the MAP alittle rich for low rpm/throttle up and part throttle/mid-range leaner and for that WOT long "5 mile flat road" run chasing your buds a bit safe lean/rich. Just takes alot of plug checks. Ouch. forgot it's a Phazer.
No I havent.Just drove it in shop tonight so digging in now.Will put controller on for sure.
