dull finish on hood, how to shine it up???

[Alatalo]

WD 40

X2.

Standard procedure in motocross racing. Sometimes the stickers are changed between every single race, always with WD40.

 

[Yammie4life]

You may have to use a plastic Renew kit that can be found pretty much anywhere. I restored a 6 year old z400 quad with it for a friend. Takes fine sandpaper and sands it down, and got this polish that shines it up... I think it came from Royal Distributing. Check it out online.

 

[nate007]

Those of you who don't have your location in your profile yet, please edit your profile to include your location, per site rules,
Thx
007 TY staff

 

[curryd]

What I have done in the past with my Nytro and my quads, I use mineral spirits. I have had good luck. Make sure its clean though and use a microfiber cloth.

 

[gapl1953]

I took off the decals on my 08 nytro hood, then I used goo gone to remove the sticky stuff, now I have a dull finish where I used the goo gone, the rest of the hood still has the shine, any body else do this? What can I try to bring back the shine, any help would be great!! thanks

I did exactly the same thing right down to the goo gone and I too have that dull finish where the warning sticker was. I'd love to know how to fix it!!!!!!!!!!!!!!

A tip for the future, I use WD40 to remove sticker goo. It works like a charm and doesn't hurt the plastic. Just be sure to use a soft clean clean towel. If you drop the towel, get a new one. Any dirt or grit on towel will scratch the finish.