ECP FILTERS INSTALLED PICTURES

[welterracer]

These are pics of my filters installed and Clear taillight!

P.S. i do have an extra ,, Clear taillight if anyone wants $55 shipped in the USA!!

 

[POWERHAULIC]

LOOKS GREAT

 

[kviper]

The filter's look SWEEEET what did you do for spring's and jetting, How mutch induction noise,What was the gain's and how mutch $ for the package, I could use a couple more HP'S for a select F7 & a SRX but don't like a lot of noise and don't want to screw up a beautiful sled, the RX is so smooth as you probably already know.

 

[kviper]

Sorry didn't see the spec's for the filter's wright a way but the rest of the info would be nice if you could. THANK'S

 

[snowbeast]

Hey welt,where are you hiding your battery? Looks good,very clean job,cant wait for mine>

 

[welterracer]

The filter's look SWEEEET what did you do for spring's and jetting, How mutch induction noise,What was the gain's and how mutch $ for the package, I could use a couple more HP'S for a select F7 & a SRX but don't like a lot of noise and don't want to screw up a beautiful sled, the RX is so smooth as you probably already know.

They are the ECP k@N kit!! I used the green and silver springs (silver worked the best) 165 main jets ,, all other carb setting stock!! NGK spark plugs!!

A whole review of the kit is available under ECP FILTER TEST DAY!!

 

[longshot]

ecp kit

Nice pics welter. Did you run the sled like at moderate trail speeds? When I put the same kit in mine silver springs- machine ran shitty betweeen 4000 and 6000- popping out the exhaust. Called Holtzman and he said the silver springs were primarily for dragging- Mash the throttle and let off when you're thru racing. He recommended the red springs as his sheet says in the tube that the springs were shipped in. Just trying to find out if anyone has been able to trail ride the silver springs yet. He also said the guys in Canada were getting better performance from the red vs. silver. Don't know, so I bought them all to see what will work best in my setup. Still waiting for springs- will post results when I et them.

 

[Cubby's RX-1]

Hey Long shot, I rode 100+ miles on silver springs. not a problem

 

[Cubby's RX-1]

Hey Welter, where do I send the check for the tail light? and are you using the led type bulbs with yours?

 

[welterracer]

Re: ecp kit

Nice pics welter. Did you run the sled like at moderate trail speeds? When I put the same kit in mine silver springs- machine ran shitty betweeen 4000 and 6000- popping out the exhaust. Called Holtzman and he said the silver springs were primarily for dragging- Mash the throttle and let off when you're thru racing. He recommended the red springs as his sheet says in the tube that the springs were shipped in. Just trying to find out if anyone has been able to trail ride the silver springs yet. He also said the guys in Canada were getting better performance from the red vs. silver. Don't know, so I bought them all to see what will work best in my setup. Still waiting for springs- will post results when I et them.

I tried like hell to make it do the Hesitation/burble everyone was talking about but it just doesnt do it!! ITS MORE OF A HEAVY BREATHING NOISE COMING FROM THE AIRFILTERS!!

MINE RUNS AWSOME AND I AM NOT KINDING!!! AWSOME!!! ROCKS!! KICKS BUTT!!! ETC ETC...