bluegrass
Extreme
- Joined
- Mar 6, 2007
- Messages
- 96
Any one tried running a excell header with schmidt daul exhaust did you see any power gain
sorenson1610
TY 4 Stroke God
- Joined
- Dec 11, 2007
- Messages
- 1,746
- Location
- Rothschild,WI
- Website
- www.contrx.com
- Country
- USA
- Snowmobile
- 2016
Dude just buy at matched system......not sure why you want to mix and match so bad
bluegrass
Extreme
- Joined
- Mar 6, 2007
- Messages
- 96
Dude just won't to see if any one has ran this set up and as far as I know schmidt does not have a header and being I have there pipe I am looking for something to put with it there was a good reason why I asked this ?
SledFreak
TY 4 Stroke God
- Joined
- Feb 7, 2005
- Messages
- 5,511
- Location
- Ontario. Canada
- Country
- Canada
- Snowmobile
- Current 2020 ThunderCat. - SOLD!
The Excell system is a nice a piece, and I did run it on my Nytro, but you could get away with just running the excell header and having a mod done to the stock exhaust for that matter. Its only adds 2-3hp for a free-flowing muffler.... The key is to have the right map for a free flowing exhaust. Adding the PCV with the autotune is the key to making it work..
craigwsrx
Lifetime Member
- Joined
- Feb 19, 2007
- Messages
- 139
- Location
- Fenton Mi.
- Country
- USA
- Snowmobile
- 2017 Sidewinder 27,000 miles
2009 Nytro xtx 31,000 miles
2006 Attak 26,500 miles
2003 RX1 13,500 miles
2000 Mountain Max 14,000 miles
1998 SRX Mountain 17,000 miles
1995 V Max 600
1979 SRX 440
1975 GPX 338
1973 GP 338
I am running an Aaen header with the Schmidt Bros exhaust and it runs very good. I am also running a PC-V and programming my own fuel and it runs even better. I currently have over 18,000 miles on this set up with no issues.
Similar threads
- Replies
- 9
- Views
- 2K
- Replies
- 3
- Views
- 1K