Finally!

[mbarclay]

http://www.ty4stroke.com/viewtopic.php? ... ht=#734919

 

[Grimm]

Yeah, that does seem low. Are those suspensions that adjustable?

What air pressure are running in the ski shocks? I've seen guys run them where the A arms are parallel to the ground, but I've never seen them beyond that.

 

[Nick1945]

Looking good, won't be long now

 

[mbarclay]

Yeah, that does seem low. Are those suspensions that adjustable?

What air pressure are running in the ski shocks? I've seen guys run them where the A arms are parallel to the ground, but I've never seen them beyond that.

yeah they have a ton of adjustment, you can adjust the shock angle from 1-3. I think thats the adjustment that makes mine sit so low right now.

I run the floats with 50 psi my a arms are parallel to the ground

 

[JROCK]

Its very easy to adjust the ride height on these skids. From what i recall (measured 2 yrs ago) you can raise and lower it 4-5 inches. Do you have the install measurements from AD boivin?

 

[mbarclay]

Its very easy to adjust the ride height on these skids. From what i recall (measured 2 yrs ago) you can raise and lower it 4-5 inches. Do you have the install measurements from AD boivin?

I used this to install it? I bought it used so i didnt have anything from AD
http://www.totallyamaha.com/ExpertX_M10 ... nstall.htm

 

[mbarclay]

heres one with the shocks at a different angle and its much hihger look at the shocks compared to mine.

 

[JROCK]

Looks like in ur pic you at the lowest setting for your ride height. adjuster! I will post my install sheet if I can find it so you can double check

 

[mbarclay]

there I adjusted it and put it back in today im sure im going to have more to make after the first ride but it seems pretty good right now.

Hey JROCK whats this nut for?

 

[Viper_Dave]

Follow this link http://www.adboivin.com/Afficher.aspx?p ... &langue=en Go to Expert manual listed on the right side of listings. Click and print. It's all there!

 

[mbarclay]

Follow this link http://www.adboivin.com/Afficher.aspx?p ... &langue=en Go to Expert manual listed on the right side of listings. Click and print. It's all there!

alright I have it figured out now lol thanks for the link

 

[JROCK]

That looks better! I love the look when there jacked up like that. Keep that manual handy when your out setting it up. Most guys have that nut set with about 1/2 inch of thread showing from what i recall sleds away to look at it!