Handle bar riser

[stomper]

I am wanting to put a taller riser on my 03 RX1. I have already put a 2" riser on which is the max before I have to replace the throtle cable. From my research I will need an 05 RX1 mountain cable. Is there anything else like brake hose, switch wires, ect..... that will also require extending. Also how much taller of a riser will I be able to go with, with the 05 mountain cable.

 

[maim]

you will nee the throttle cable, brake line and park brake cable from 05 rx mountain. I had a 4" powermadd on my 05 war and the wiring was what stopped me from going taller as I would have had to re-route or legthen it. if you are going with a pivot style riser, you can go taller as long as you roll bars forward.

 

[Theblackbullet]

you will nee the throttle cable, brake line and park brake cable from 05 rx mountain. I had a 4" powermadd on my 05 war and the wiring was what stopped me from going taller as I would have had to re-route or legthen it. if you are going with a pivot style riser, you can go taller as long as you roll bars forward.

X2

I have a 4inch riser plus the pivot base from powermadd..... So its more like 5+ but like previously stated if you roll the bar ahead, you can get away with it. I got a longer throttle cable and re routed the brake line and it all works perfectly

 

[stomper]

Thanks guys that's exactly what I was looking for.