WarriorPilot
Veteran
Did a search but couldn't find anything, a friend has a 2002 sc111 ski-doo skid to be installed in a RX-1,we would appreciate any help if someone has done this mod, Thanks
Mikey
TY 4 Stroke Junkie
- Joined
- Apr 13, 2003
- Messages
- 615
- Reaction score
- 2
- Points
- 893
- Location
- Thunder Bay Ontario
- Country
- Canada
- Snowmobile
- 03 RX-1
Havent done it but I have a sc-10 3 outa an X and seriously looked at doing it and it didnt look too difficult the width is usable and the front arm looked as if to be mounted close to where the stock one would. You need a centre of driveshaft to front arm measurement from the sled the suspension came outa if that is usable on the rx then its a piece o cake.
KbxSrx
TY 4 Stroke Guru
are you a farmer? Sounds like the saskatchewan 2 step, one step forward, 2 back!
riley890
Newbie
susp install
i have a 03 rx1 was a short track 121. i am putting a 151 out of 03 summit quite simple to do.make a template of skidoo tunnel suspension is coming from do center on front drive mark out all mounting locations on template.move your original backing plates for strength at new mounting holes and while you are in there change to extroverts and enjoy the weight loss.i will be doing mine next week i will load pics then.im waiting for my suspension to arrive.ps one nice thing is it will move front mounting bolts back in tunnel where they are easier to work with and no presprung rear like the yammy that is oh so nice not to install.
i have a 03 rx1 was a short track 121. i am putting a 151 out of 03 summit quite simple to do.make a template of skidoo tunnel suspension is coming from do center on front drive mark out all mounting locations on template.move your original backing plates for strength at new mounting holes and while you are in there change to extroverts and enjoy the weight loss.i will be doing mine next week i will load pics then.im waiting for my suspension to arrive.ps one nice thing is it will move front mounting bolts back in tunnel where they are easier to work with and no presprung rear like the yammy that is oh so nice not to install.
