Have the dreaded oil tank leak

[TBay Sledhead]

So my oil tank has developed a 1" crack by the bottom mounting bolt. I know this is an issue but having trouble finding via search what the best repair is. Can I MIG weld it or do I have to get it TIG welded. Going to look for some rubber mounts. I know Barn of Parts has kit but will look here in Canada first.

 

[hibshman25]

Best bet is to have it TIG welded. Key to welding them is having it oil free. Any oil in the crack and it will weld like crap.

 

[HABS 1]

i took mine to work and migged it, not the best aluminum welder but turned machine way down and actually turned out good , had no leaks last 2 years and i think the added weld material strengthed that corner, i figured i had nothing to loose by trying! if not i cant see a fab shop charging u much to do it for u if u prep it

 

[kramerica72]

I bit the bullet and bought the aftermarket CFM tank on eBay. High quality with beautiful welds. If it ever leaks or breaks they replace it free.

 

[HABS 1]

yes thats the best way to go iseen them theiir nice

 

[stevieu1]

JB Weld rode all last season no leaks so far.

 

[RTX]

I bit the bullet and bought the aftermarket CFM tank on eBay. High quality with beautiful welds. If it ever leaks or breaks they replace it free.

I agree. This is the way to go.
Fix it once/forever.

 

[ranger1]

X2 on the jb weld, cleaned, sanded it & built it up with a few coats to add strength. Did it three years & still no leaks

 

[TBay Sledhead]

Took it in today to have it TIG welded. JB makes me nervous.