RTX Meirda
TY 4 Stroke Master
Turk....was that with ECP's or without or both?
Turk
Tech Advisor
This was with both & tested running against my buds sleds. I changed the clutching to run at different rpm,s but allways found this rpm range to be the fastest. this was tested on snow against my friends sleds same day same conditions!!! All I can say is my sled was quickest & fastest at these rpm,s & can,t vouch for anyone elses sleds. What feels faster or quicker in a lot of cases ain,t. You gotta run against some other sleds same day same conditions to compare.
Frostbite
TY 4 Stroke God
Grader, I got it from this post regarding "does increasing engine RPM increase top speed":
RX-Dave
Extreme
joined: 14 Nov 2004
Posts: 103
Posted: Sat Jan 08, 2005 10:57 am Post subject:
On a note here, I tested my factory tach to a Digatron SN54, and at 10,500 factory tach RPM, it is running 10,200 on the Digatron. So, if it is running best at 10,5 - you are actually only spinning it about 10,2 - right where yammy says it is "all-good"
This is the first I had heard of this also. I had always heard the RX-1 Tachs were super accurate.
I had a digitron on my MSRX and it agreed almost perfectly to the one on the sled but on an RX-1 I have no idea.
Frosty
RX-Dave
Extreme
joined: 14 Nov 2004
Posts: 103
Posted: Sat Jan 08, 2005 10:57 am Post subject:
On a note here, I tested my factory tach to a Digatron SN54, and at 10,500 factory tach RPM, it is running 10,200 on the Digatron. So, if it is running best at 10,5 - you are actually only spinning it about 10,2 - right where yammy says it is "all-good"
This is the first I had heard of this also. I had always heard the RX-1 Tachs were super accurate.
I had a digitron on my MSRX and it agreed almost perfectly to the one on the sled but on an RX-1 I have no idea.
Frosty
