
DigitalFusion
VIP Member
- Joined
- Jan 19, 2011
- Messages
- 1,152
- Reaction score
- 123
- Points
- 988
- Location
- Chisago City, MN
- Country
- USA
- Snowmobile
- 14 Viper LTX, 10 Turbo Phazer MTX, 08 Phazer, 88 SnoScoot
Hey All,
I brought the sled into the garage to warm up so I could check out a few things. Massive chunks of ice started falling off from under the tunnel. Like football sized chunks! My garage floor nearly flooded with all the water that was melting off the machine. I musta shed 40 pounds off the thing! Since there are no tunnel coolers on these, does anyone have any tips and/or tricks to minimize the buildup besides bringing her in every once in a while to thaw out?
I brought the sled into the garage to warm up so I could check out a few things. Massive chunks of ice started falling off from under the tunnel. Like football sized chunks! My garage floor nearly flooded with all the water that was melting off the machine. I musta shed 40 pounds off the thing! Since there are no tunnel coolers on these, does anyone have any tips and/or tricks to minimize the buildup besides bringing her in every once in a while to thaw out?
yamahahaapex
TY 4 Stroke Master
theres a thread going in the general yamaha discussion with alot of tips on there and its still going


**sj**
Lifetime Member
- Joined
- Mar 2, 2004
- Messages
- 6,064
- Reaction score
- 969
- Points
- 1,983
- Location
- southeastern Mich
- Country
- USA
- Snowmobile
- 2019 SRX
my tip...equalize the temp differentail between the muffler and the tunnel...number of ways to do that...rear heat exchanger warming the tunnel...or other mods... let me know if you want other ideas that work
Direct Attack
Veteran
Do you have a link for this thread ?yamahahaapex said:theres a thread going in the general yamaha discussion with alot of tips on there and its still going
wileya
Pro
- Joined
- Nov 30, 2009
- Messages
- 125
- Reaction score
- 6
- Points
- 328
- Location
- Forest, Ontario
- Country
- Canada
- Snowmobile
- 15 sr viper rtx se
Direct Attack said:Do you have a link for this thread ?yamahahaapex said:theres a thread going in the general yamaha discussion with alot of tips on there and its still going
http://www.ty4stroke.com/viewtopic.php?t=97387
Similar threads
- Replies
- 16
- Views
- 5K