Ice ripper noise level?

[kinger]

Wondering how loud the ice ripper is? I'm toying with a pre drilled predator and studs or a ice ripper but I want quiet, my ripsaw now howls a fair amount.

 

[buddah]

I put an Ice Ripper on my 06 Nytro several hundred miles ago. I haven't noticed any noise change at all.

 

[STAIN]

change in noise from the original track or change over the initial instalation of the ice ripper? My ripsaw is VERY noisy and I am thinking about a 136 ice ripper.

 

[kinger]

Change from a quiet track to a ice ripper. I would like to reduce the noise from my current ripsaw.

 

[onlyblue]

i have one on the vector and attak, dont feel it is noisy at all....

 

[Roadrunner]

Change from a quiet track to a ice ripper. I would like to reduce the noise from my current ripsaw.

For those of you who don't know, the ice ripper is a quiet track design.

 

[DaveyBoy]

Roadrunner i am confused cause my iceripper was awful loud last week riding in really good conditions. IE plenty of snow in the allagash I better look at skid and track to see if i have another issue.And where did u see this is a quiet design their site ?? thanks

 

[04 Hemi]

iceripper noise

I have 2000 miles on my iceripper and it`s a way quieter than the ripsaw, the stock track that is. The only trouble I had is tearing a 4 inch chunk off spinning over a stump, but not overly serious!

 

[Roadrunner]

Roadrunner i am confused cause my iceripper was awful loud last week riding in really good conditions. IE plenty of snow in the allagash I better look at skid and track to see if i have another issue.And where did u see this is a quiet design their site ?? thanks

Go on ebay and do a search for "camoplast ice ripper" the guy selling them has a picture of the inside of the track showing it is the quiet design.

 

[pro116]

There is alittle pas on the inside to quiet the track howling down.

 

[Fergie]

I have over 1500 miles on the iceripper on my attak & it is way quieter than the stock ripsaw.