Identifying ground blocks in an RS Nytro (AKA Vector)

[Bradford]

I am going to solder my ground blocks before they have a chance to fail. I found great information on the location of these ground points for Apex's but couldn't find much on the Carbed Vector motors. I was able to find 3 locations (see pics). Does anyone know if there are any more?

 

[blown apex]

ground distribution

my apex wouldnt run after i took those shunts apart
i put dialectric on it and reassembled and still wouldnt run
i cant remember all the codes one was tps
i cut striped and soldered them all together
their is also some with power ditribution also

 

[Bradford]

I didn't see any power distribution blocks but they might be there. However, I think your apex would have more wiring than a 3-holer carbed vec motor

I soldered the points shown in the pics above and no issues or codes