RtxViper
Expert
I just got done installing the skid back into my 07 apex rtx. I did the 144" extension from muffinworks with a track off an xtx. after trying to tighten the track up I am almost out of adjustment and i still have 3" of loose track hanging off the bottom. Anyone have any ideas? i measured the rail ext. it is 11" like it shows on their website. Any help would be appreciated thanks!
Re: Installed muffin works rail ext to 144 and track is way
121-144 Extensions need to be 11.5", not 11". 144-121=23" and then 23" divided in half is 11.5"
You didn't drop a tooth on your drivers, did you? This will make a difference as well.
scmurs
RtxViper said:
121-144 Extensions need to be 11.5", not 11". 144-121=23" and then 23" divided in half is 11.5"
You didn't drop a tooth on your drivers, did you? This will make a difference as well.
scmurs
Turtle
Lifetime Member
- Joined
- Feb 27, 2006
- Messages
- 1,340
- Location
- Marathon, WI
- Country
- USA
- Snowmobile
- '17 Polaris Switchback 800 Pro S LE
'15 Viper RTX SE w/ MPI turbo - sold
'07 FX Phazer GT
Re: Installed muffin works rail ext to 144 and track is way
Please contact us directly and we will help work through it.
RtxViper said:
Please contact us directly and we will help work through it.
rxwhopper
TY 4 Stroke Guru
do you guys have any 136 mono to 144 extensions? and does a guy have to change the factory ext and the attak for doing that?
RtxViper
Expert
we got it figured out thanks jason!
Turtle
Lifetime Member
- Joined
- Feb 27, 2006
- Messages
- 1,340
- Location
- Marathon, WI
- Country
- USA
- Snowmobile
- '17 Polaris Switchback 800 Pro S LE
'15 Viper RTX SE w/ MPI turbo - sold
'07 FX Phazer GT
rxwhopper said:
An extension that length is only 4". We don't have that available in our product offerring yet.
But here's a link to a pair for sale in the classifieds:
http://www.ty4stroke.com/viewtopic.php?t=75846
