Just did a full oil change and now warning light is on and gauge says oil 00409?

[edge_232]

So I got my oil change all done, (thanks to the guys that posted on my question before) but now my warning light is on solid not flashing and when I press and hold the reset button I get the word "OIL" and then the number "00409" flashing? I do have a Vector gauge on my Nytro but everything has worked fine fine.

When I first finished the oil change the warning light was not on but as when I topped the oil off to the correct level I did forget to reconnect the oil level connector to the plug and fired the sled up. I believe this tripped the warning light and code. I connected the oil switch and still get the warning light and code.

I looked in the manual and in the forums but couldn't find anything on this code.
Any ideas or do I just need to reset the gauge?

 

[maim]

I think you just need to reset the gauge. basically it is saying you are 409 miles over your oil change. freaked me out when I saw it the 1st time as well.

link on how to reset it on an apex. should be the same for an rs I think.

http://ty4stroke.com/threads/reset-oil-change-warning-on-display.116599/#post-1034398

 

[natedawgedog]

http://www.ty4stroke.com/threads/oil-change-reminder-message.88584/

here is the topic from a little while back.

 

[edge_232]

Thanks Guys, I'll give it a try tonight and let you know how it goes.

 

[edge_232]

It Worked Perfectly! Thanks Guys!