Little help finding a 144 rear suspension to replace my wifes 129 on her phazer

[larryh]

My wife has 07 phazer with 129 track and looking to extend to a 144 track and don't want to put that much of an extension on. I am looking for a complete rear suspension off a mtx or xtx and being a flat lander every snowmobile shop I call has nothing that long, anyone know of a salvage shop or something that might have one?

 

[hibshman25]

I have a bunch of xtx 144 nytro rails. Been contemplating looking into building a phazer xtx. Going to try and swap all the stock phazer arms to the 144 rails. I believe the front phazer arm will fit right up. Haven't looked too deeply into the rear arm and coupling blocks yet.

I could also sell you a complete xtx skid if you want to just put the whole skid in.

 

[larryh]

I have a bunch of xtx 144 nytro rails. Been contemplating looking into building a phazer xtx. Going to try and swap all the stock phazer arms to the 144 rails. I believe the front phazer arm will fit right up. Haven't looked too deeply into the rear arm and coupling blocks yet.

I could also sell you a complete xtx skid if you want to just put the whole skid in.

How much for a set of rails? I think I could take everything off her suspension and just switch it over, but I will check tomorrow at yami shop

 

[hibshman25]

Rails I have are nytro xtx....not Phazer. Just making sure you caught that. Will send a pm with some pricing.

 

[Gone Blue]

My wife has 07 phazer with 129 track and looking to extend to a 144 track and don't want to put that much of an extension on. I am looking for a complete rear suspension off a mtx or xtx and being a flat lander every snowmobile shop I call has nothing that long, anyone know of a salvage shop or something that might have one?

What is your concern with using extensions? I used Tracks USA extensions to extend my 121" RTX up to 144" with a 6 degree tip up. The sled runs and handles awesome. I dont baby the sled and ride it pretty hard. I would bet a rail with extensions is stronger than a 144" rail. The way the extension interlocks with the rail and then uses 6 bolts per extension is pretty stout. G.B.

 

[stingray719]

Rails I have are nytro xtx....not Phazer. Just making sure you caught that. Will send a pm with some pricing.

This Phazer had Nytro Skid and Nytro cut down track so it can be done. No I didn't put it in .

 

[DigitalFusion]

I have a bunch of xtx 144 nytro rails. Been contemplating looking into building a phazer xtx. Going to try and swap all the stock phazer arms to the 144 rails. I believe the front phazer arm will fit right up. Haven't looked too deeply into the rear arm and coupling blocks yet.

I could also sell you a complete xtx skid if you want to just put the whole skid in.

i know this is an old thread, just wondering if you were ever able to find out if all the phazer parts bolt up?