looking for drag n fly setup for apex

[Kelly1507]

Hey guys just wondering if anyone has a killer setup for heel clicker drag n fly. I am new to the whole heel clicker thing. The mods I have are ulmers intake mod, stock gearing, and soon to have ulmers software for intake mod with 10 tooth cogs. Any suggestion?

 

[STAIN]

Go to your hardware store and get some 1/2" and 1/4" set screws for fine tuning
Stock secondary
Black hc primary spring
bolt + washer in the heel
bolt in the center
1/2" set screw in the tip
bolt + washer in the OD
This is a pretty good start. I would also try a silver secondary spring after you run this set up.