Machining upper ball joints on the 08?

[kizerboy]

About a year or so ago there was a topic on here about machining the upper ball joint to bring the camber in. Has any one done this and how much matirial was removed? If there are any links to the old topic can you ponit me too it. Thanks.

 

[theCATman]

2.5mm

 

[devil]

some people did 1mm some did up to 2.5mm the first post i saw said 2mm so thats what i removed. unfortunetly i did too many changes at once to give credit to any one change.

 

[Removed User]

relaxs the front end a bit, its good

 

[kizerboy]

Thanks, for the info guys. I'll take a bit off at a time and give it a try.